TMN Feed Tech Media Network - TMN Updates. XML Feed for the Updates - TMN FeedElektrik

 


Subscribe to Home page feed

Updates

Automatic Integrated Circuit Modeling Spice

Automatic Integrated Circuit Modeling Spice

Automatic Integrated Circuit Modeling Spice (AIM-Spice) is a version of SPICE, the most popular analog circuit simulator.

AIM-Spice is a new version of SPICE running under the Microsoft Windows and Linux operating systems. AIM-Spice for Windows is capable of displaying graphically the results of a simulation in progress, a feature that allows the operator to terminate a run based on an instant information on intermediate simulation results.

The MOSFET in Power Electronics

delabs Notes - In a Circuit Module, if all Power and Signal Polarities are reversed. All NPN to PNP, All N-Channel to P-Channel and
Vice Versa. All Diodes and Caps too turned around. This Topsy Turvy or Mirror Design ought to work in Theory. It has worked for some circuits in practice too in my experience. ?

Some believe that N-Channel is more Robust than the P Type. In Bipolar Transistor NPN is more trusted for the final output stages. The NPN Transistor and N-Channel turn-on by a Positive control bias. It may be inappropriate to say this mosfet is NPN or PNP.

Earthing Practice and Power Quality

"Earth leakage currents arise mainly from the EMC filters built into electronic equipment with switched mode power supplies. Standards limit the leakage current from non-fixed equipment (i.e. equipment that plugs into a standard socket outlet) to less than 3.5 mA. When a lot of electronic equipment is in use, the total leakage current in the protective conductor can become significant."

Earthing Practice by Trevor Charlton

SCADA - Supervisory Control and Data Acquisition

A Closed loop control system has a Sensor-Controller-Actuator. The Bimetal Thermostat has all the three in the Bimetal itself. The Sensor, the Relay Contact and the Intelligence. This is Process Control when implemented to control the temperature in a Bakery Oven.

This leads us to Sensors-Transmitter-Controller-Outputs-Actuators. Where each is an independent electronic/electrical component of an entire Process Control system. The Process could be Temperature, Pressure, Speed, or Level.

Build Electronic Circuits Like a Pro

If you want to build electronic circuits, you need to connect the components of your circuit somehow. If you expect to make your circuit work more than just a few times, you need a solid way of connecting them. You need to create a printed circuit board (PCB).

"I started playing with electronics as a hobby when I was 14. Since then I have finished a Master's degree and founded two electronic design companies."

Build Electronic Circuits Like a Pro

CAN Controller Area Network in Automation

CAN (Controller Area Network) is a serial bus system, which was originally developed for automotive applications in the early 1980's. The CAN protocol was internationally standardized in 1993 as ISO 11898-1 and comprises the data link layer of the seven layer ISO/OSI reference model.

CAN Controller Area Network in Automation

CANopen is a CAN-based higher layer protocol. It was developed as a standardized embedded network with highly flexible configuration capabilities.

LaTeX Equation Editor - Equation Maths

Writing Mathematics on the Internet. Witing equations is difficult in a doc, they have to be font independent, that implies images. Webapps do it well.

LyX – The Document Processor

LyX combines the power and flexibility of TeX/LaTeX with the ease of use of a graphical interface. This results in world-class support for creation of mathematical content (via a fully integrated equation editor) and structured documents like academic articles, theses, and books.

Pages

Subscribe to Updates