Reserves & Savings of delabs are being used up in the Maintenance of these Websites, Blogs and Services – delabs sections. delabs needs Sponsors, Donors or Advertisers to help continue the Services and Technology Blogs. Use PayPal to donate to my Email, see image below.
Rates of Advertising Types, Sponsorship and Promotions in the delabs-dapj Websites, Services and Blogs.
Engineers, Technologists, Manufacturers, Firms or Companies can post Sponsored Articles and Listings in our sites and blogs - delabs sections.
About Tech Media Network - This very page will have updated information on delabs and dapj. Blog will contain updates and other posts.
Single plate induction cooker demonstration board Uses ST7LITE09 and STGW40NC60WD (40 A, W series).
The design is entirely controlled by a simple ST7FLITE09Y0 8-bit microcontroller, which provides the PWM driving signals, communicates information to the user interface, and drives the fan and relay control to the plate feedback.
With Single Voltage Flash Memory, Data Eeprom, Adc, Timers, Spi Active - ST7LITE09Y0 8-Bit Mcu
ViPEC is a powerful tool for the analysis of high frequency, linear electrical networks. It takes a schematic description of the electrical network and performs a linear analysis in the frequency domain.
The output is in the form of port parameters (S, Y or Z) with results presented on a user defined grid, Smithchart or table. It can also be used to compute other characteristics like stability factors and group delay.
Provides substantial material on various Industrial Automation and Chemical Engineering topics. Pages of interest Material Science, Thermodynamics, Process and Product Design and Fluid Mechanics.
CACHE Teaching Resource Center
Here are reference areas for Industrial Automation and Process Control Instrumentation Students/Teachers.
Analog Designers created Spice, Analog Design Professionals are adding their experience in many commercial and free spice EDA tools. When you are creating a new demanding design, a working solution is achieved by combining workbench and simulation work.
The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1.5A over a 1.2V to 37V output range.
n
Writing Mathematics on the Internet. Witing equations is difficult in a doc, they have to be font independent, that implies images. Webapps do it well.
LyX combines the power and flexibility of TeX/LaTeX with the ease of use of a graphical interface. This results in world-class support for creation of mathematical content (via a fully integrated equation editor) and structured documents like academic articles, theses, and books.
CAN (Controller Area Network) is a serial bus system, which was originally developed for automotive applications in the early 1980's. The CAN protocol was internationally standardized in 1993 as ISO 11898-1 and comprises the data link layer of the seven layer ISO/OSI reference model.
CAN Controller Area Network in Automation
CANopen is a CAN-based higher layer protocol. It was developed as a standardized embedded network with highly flexible configuration capabilities.
If you want to build electronic circuits, you need to connect the components of your circuit somehow. If you expect to make your circuit work more than just a few times, you need a solid way of connecting them. You need to create a printed circuit board (PCB).
"I started playing with electronics as a hobby when I was 14. Since then I have finished a Master's degree and founded two electronic design companies."
An Excellent way to expand your A/D convertors I/O capability. Multiple Analog Inputs can be routed to a single Opamp or Analog Input of a uC or uP System. Use protection Zeners or clamping inputs.
A Closed loop control system has a Sensor-Controller-Actuator. The Bimetal Thermostat has all the three in the Bimetal itself. The Sensor, the Relay Contact and the Intelligence. This is Process Control when implemented to control the temperature in a Bakery Oven.
This leads us to Sensors-Transmitter-Controller-Outputs-Actuators. Where each is an independent electronic/electrical component of an entire Process Control system. The Process could be Temperature, Pressure, Speed, or Level.
