Reserves & Savings of delabs are being used up in the Maintenance of these Websites, Blogs and Services – delabs sections. delabs needs Sponsors, Donors or Advertisers to help continue the Services and Technology Blogs. Use PayPal to donate to my Email, see image below.
Rates of Advertising Types, Sponsorship and Promotions in the delabs-dapj Websites, Services and Blogs.
Engineers, Technologists, Manufacturers, Firms or Companies can post Sponsored Articles and Listings in our sites and blogs - delabs sections.
About Tech Media Network - This very page will have updated information on delabs and dapj. Blog will contain updates and other posts.
The JFET-input operational amplifiers in the TL07x series are designed as low-noise versions of the TL08x series amplifiers with low input bias and offset currents and fast slew rate.
The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1.5A over a 1.2V to 37V output range.
n
Analog Designers created Spice, Analog Design Professionals are adding their experience in many commercial and free spice EDA tools. When you are creating a new demanding design, a working solution is achieved by combining workbench and simulation work.
ViPEC is a powerful tool for the analysis of high frequency, linear electrical networks. It takes a schematic description of the electrical network and performs a linear analysis in the frequency domain.
The output is in the form of port parameters (S, Y or Z) with results presented on a user defined grid, Smithchart or table. It can also be used to compute other characteristics like stability factors and group delay.
Single plate induction cooker demonstration board Uses ST7LITE09 and STGW40NC60WD (40 A, W series).
The design is entirely controlled by a simple ST7FLITE09Y0 8-bit microcontroller, which provides the PWM driving signals, communicates information to the user interface, and drives the fan and relay control to the plate feedback.
With Single Voltage Flash Memory, Data Eeprom, Adc, Timers, Spi Active - ST7LITE09Y0 8-Bit Mcu
delabs Notes - In a Circuit Module, if all Power and Signal Polarities are reversed. All NPN to PNP, All N-Channel to P-Channel and
Vice Versa. All Diodes and Caps too turned around. This Topsy Turvy or Mirror Design ought to work in Theory. It has worked for some circuits in practice too in my experience. ?
Some believe that N-Channel is more Robust than the P Type. In Bipolar Transistor NPN is more trusted for the final output stages. The NPN Transistor and N-Channel turn-on by a Positive control bias. It may be inappropriate to say this mosfet is NPN or PNP.
Lab Experiments using A/D and D/A cards. PC Interface. Using Matlab, Learning PID control. DC Motor control. Hovercraft project with PWM and Fans as Actuator of control system, Uses NIDAQ Interface.
A virtual 8051 is interfaced with virtual peripherals such as a keypad, motor, display, UART, etc. The student can write 8051 assembly code, step through the code and observe the effects each line has on the internal memory and the external peripherals.
The student can learn how to scan a keypad, multiplex 7-segment displays, control a motor and count its revolutions, etc.
