LT1510 – CC CV Battery Charger

LT1510 - CC CV Battery Charger

A Circuit for charging NiCd, NiMH and Lithium-Ion Batteries.PWM 500kHz with Soft Start and Shutdown Control. The LT1510 can charge batteries ranging from 2V to 20V. Ground sensing of current is not required and the battery’s negative terminal can be tied directly to ground. A saturating switch running at 200kHz (500kHz for LT1510-5) giveshigh charging efficiency and small inductor size.

nn

Linear Technology – LT1510 – CV CC Battery Charger

delabs Notes –

Some things to know in battery charging. A battery that has drained will almost appear like a short circuit to the charger. A battery is never fully drained, if you want a nice battery life. Overcharging a battery can damage it and is not safe too. We have to charge it with an optimum current, upto a Top up charge voltage only. Then a trickle to compensate for internal leakage on no-load. Float charging and Cyclic charging are some popular methods.

It can charge lithium-ion (Li-Ion), nickel-metal-hydride (NiMH) and nickel-cadmium (NiCd). These require constant-current and constant-voltage charging. A 2A peak current switch for Boost Charging may be helpful for charging Lead Acid Batteries too. A 0.1 ohm current sense shunt makes charging current programmable.

3.6v and 3.7v Lithium Battery Charger

The charger is based on the LT1510IN Constant-Voltage/ Constant-Current battery charger IC from Linear Technology. It can be configured to charge NiCd, NiMH or Lithium-Ion (and Lithium-Polymer) batteries at up to 1.5 Amps.

You may also like...