Provides substantial material on various Industrial Automation and Chemical Engineering topics. Pages of interest Material Science, Thermodynamics, Process and Product Design and Fluid Mechanics.
CACHE Teaching Resource Center
Here are reference areas for Industrial Automation and Process Control Instrumentation Students/Teachers.
A Closed loop control system has a Sensor-Controller-Actuator. The Bimetal Thermostat has all the three in the Bimetal itself. The Sensor, the Relay Contact and the Intelligence. This is Process Control when implemented to control the temperature in a Bakery Oven.
This leads us to Sensors-Transmitter-Controller-Outputs-Actuators. Where each is an independent electronic/electrical component of an entire Process Control system. The Process could be Temperature, Pressure, Speed, or Level.
uniting warring factions in parts of what is now Norway, Sweden, and Denmark - just as Bluetooth technology is designed to allow collaboration between differing industries such as the computing, mobile phone, and automotive markets.....
"The Bluetooth Special Interest Group (SIG) is formed with five companies." 1998 AD
On your phone - With Bluetooth technology your phone can do more than you realize.
A tool for developers of small digital devices and radio amateurs, for those who is familiar with Boolean algebra and Karnaugh Map optimization method, best suits for electrical engineering students.
Karnaugh Minimizer - Refactoring Code
The main Firefly board uses an Atmel ATmega1281 8-bit micro-controller with 8KB of RAM and 128KB of ROM along with Chipcon’s CC2420 IEEE 802.15.4 standard-compliant radio transceiver for communication. The maximum packet size supported by 802.15.4 is 128 bytes and the maximum raw data rate is 250Kbps.
Accelerometers and Gyroscopes as well as combination IMU devices (Inertial Measurement Unit). The ADXL345 from Analog Devices is a small, thin, low power, 3-axis accelerometer with high resolution 13-bit measurement at up to ±16 g.
Lab Experiments using A/D and D/A cards. PC Interface. Using Matlab, Learning PID control. DC Motor control. Hovercraft project with PWM and Fans as Actuator of control system, Uses NIDAQ Interface.
Single plate induction cooker demonstration board Uses ST7LITE09 and STGW40NC60WD (40 A, W series).
The design is entirely controlled by a simple ST7FLITE09Y0 8-bit microcontroller, which provides the PWM driving signals, communicates information to the user interface, and drives the fan and relay control to the plate feedback.
With Single Voltage Flash Memory, Data Eeprom, Adc, Timers, Spi Active - ST7LITE09Y0 8-Bit Mcu
ViPEC is a powerful tool for the analysis of high frequency, linear electrical networks. It takes a schematic description of the electrical network and performs a linear analysis in the frequency domain.
The output is in the form of port parameters (S, Y or Z) with results presented on a user defined grid, Smithchart or table. It can also be used to compute other characteristics like stability factors and group delay.
The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1.5A over a 1.2V to 37V output range.
n
